R&T tech session?

A place to hang out and discuss all things Porsche.

R&T tech session?

Postby Jad on Tue Nov 15, 2005 10:07 am

OK, who is the wise guy that thinks my 944 weighs less than a spec Miata racer:?: Greg? Bob?

I was looking up directions to the tech session in the new Witness and saw that :roll: The last time there, I came off the scales at ~3400 lbs, not quite a 928, but I don't think even a fiberglass engine would get me into spec Miata territory. I plan on driving it up to find out though. Will any of my RSA competitors be joining me?

By the way, what is the address of R&T? The ad just gives directions, but the GPS likes an actual street address.
Jad Duncan
997 S Cab - Sold
996 "not a cup car" Sold
Tesla Model S
Porsche Taycan
https://www.goldfishconsulting.com/
User avatar
Jad
Pro Racer
 
Posts: 1788
Joined: Wed Jun 30, 2004 11:03 am
Location: Del Mar

Postby gulf911 on Tue Nov 15, 2005 3:55 pm

yep, money well spent... :lol:

C'mon Jad...How does a sub 2800lb 944 ( I owned a 1983/4) go to 3400lbs for a turbo?? :roll: What did they use?, Lead soundproofing?... :lol:
Dan Andrews
#2 Carmine Red GT4 , 19" Forgelines , LWBS.
User avatar
gulf911
Pro Racer
 
Posts: 1202
Joined: Wed Jun 30, 2004 5:17 pm
Location: San Clemente

Postby Doug on Tue Nov 15, 2005 4:59 pm

Hey Jad & Dan,

Just razzin' you, Jad, about your acid-dipped 944 with helium in the tires. :D

Was out at Buttonwillow on Sunday, and saw Mr. Comeau put on a very fine drive. Zebra power!!

Come on down! See y'all on Saturday.

R&T's street address is 1499 Monrovia Ave., Newport Beach, CA 92663.

--Doug
Doug Kott
1989 944 S2
User avatar
Doug
Member
 
Posts: 22
Joined: Mon Nov 29, 2004 11:09 am
Location: Lake Forest, CA

Postby Jad on Tue Nov 15, 2005 6:55 pm

So your the trouble maker stirring things up :nono: . Haven't seen you in awhile, they must be keeping you busy driving Ferraris and McLarens, so no time for the lowly Porsche :wink:

Care to place your bet on what my acid dipped, 2800 lbs starting weight, mini spec Miata will be on the scales? Closest guess gets to be passed by me at the next TT :P
Jad Duncan
997 S Cab - Sold
996 "not a cup car" Sold
Tesla Model S
Porsche Taycan
https://www.goldfishconsulting.com/
User avatar
Jad
Pro Racer
 
Posts: 1788
Joined: Wed Jun 30, 2004 11:03 am
Location: Del Mar

Postby gulf911 on Tue Nov 15, 2005 9:19 pm

at or under 2900lbs , passed... he he he...bring it! :twisted:
Dan Andrews
#2 Carmine Red GT4 , 19" Forgelines , LWBS.
User avatar
gulf911
Pro Racer
 
Posts: 1202
Joined: Wed Jun 30, 2004 5:17 pm
Location: San Clemente

Postby Jad on Tue Nov 15, 2005 10:34 pm

Are you and the 747 wing going to be at R&T? That wing is so big you probably have more downforce at rest than my solid lead 944 :lol:
Jad Duncan
997 S Cab - Sold
996 "not a cup car" Sold
Tesla Model S
Porsche Taycan
https://www.goldfishconsulting.com/
User avatar
Jad
Pro Racer
 
Posts: 1788
Joined: Wed Jun 30, 2004 11:03 am
Location: Del Mar

Postby Jad on Wed Nov 16, 2005 10:33 am

Since a couple of people have asked me, I will confirm what I know about Saturday.

There is a PCA-SDR tech session at Road and Track in Newport on Saturday at 10 AM. There is an announcement in the Witness that you got/should get this week, but it is not on the website or in last months Witness. It was a lot of fun last time and they have scales to weigh your car (or not if you are Martin or Bob and try to claim their cars are legal weight-wise :lol: )

It is about an hour drive and we get to test all the Ferraris, Porsches and BMW's that R&T has in their test fleet... :? Well, not really, but it was still fun to see behind the scenes at a car magazine.
Jad Duncan
997 S Cab - Sold
996 "not a cup car" Sold
Tesla Model S
Porsche Taycan
https://www.goldfishconsulting.com/
User avatar
Jad
Pro Racer
 
Posts: 1788
Joined: Wed Jun 30, 2004 11:03 am
Location: Del Mar

Postby paul-silver on Wed Nov 16, 2005 10:58 am

Please note this event is for PCA-SDR members ONLY, at R&T's request.
User avatar
paul-silver
Autocrosser
 
Posts: 127
Joined: Tue Jul 06, 2004 1:20 pm

Postby David Ray on Wed Nov 16, 2005 4:47 pm

....no family?
David Ray
Autocrosser
 
Posts: 88
Joined: Thu Feb 17, 2005 7:03 pm
Location: Encinitas, CA

Postby Tim Comeau on Thu Nov 17, 2005 8:54 am

Hey, Doug!
It was nice to see you up there and thanks for the kind words.
Black Forest gave the Zebra a corner balance and alignment just before that event and all I had to do was one sway bar adjustment after arriving. The car was hooked up! Flat out through Riverside to a 2:13.352 on config #1 CCW. Mucho fun!
BTW, my car tipped the scales post-race at 2610 with driver and some fuel. With no driver and 1/4 tank, it's right around 2463.
So you can compare that to Jad's weight claim to see how much he's cheating by! :P :P
Tim
Comeau Racing Enterprises, Inc.
944 Spec racing specialist
New and used 944 parts source
http://www.comeauracing.com
PCA since 1985
Tim Comeau
Club Racer
 
Posts: 967
Joined: Fri Jul 16, 2004 10:49 am

Postby Jad on Thu Nov 17, 2005 9:33 am

Hey Tim, just checking, how is the stereo in the spec car? How about the ABS, airbags, heater, power mirrors, 17x10 rims with 275's, 928 brakes, power steering, windshield wipers, horn, lights, cat, passenger seat and harness, not to mention the turbo, exhaust system, intercooler and other associated parts. I am sure all of that weighs what, 10-15 lbs? :wink:

I doubt I will come in under 3000lbs with driver, and I don't weigh that much :roll: At least I have 350 rear wheel HP :lol:
Jad Duncan
997 S Cab - Sold
996 "not a cup car" Sold
Tesla Model S
Porsche Taycan
https://www.goldfishconsulting.com/
User avatar
Jad
Pro Racer
 
Posts: 1788
Joined: Wed Jun 30, 2004 11:03 am
Location: Del Mar

Postby Tim Comeau on Thu Nov 17, 2005 9:38 am

Someone stole all of that stuff out of my car just before the event. I knew I shouldn't have parked it on the street......
Tim
Comeau Racing Enterprises, Inc.
944 Spec racing specialist
New and used 944 parts source
http://www.comeauracing.com
PCA since 1985
Tim Comeau
Club Racer
 
Posts: 967
Joined: Fri Jul 16, 2004 10:49 am

Postby Jad on Mon Nov 21, 2005 6:56 pm

Great tech session, thanks Doug and R&T!

For those interested, my 'spec Miata' weight 944 turbo weighed ~3100 lbs :shock: when I put it on the scale 'as driven'. But Bob and others complained so much, I stripped it, windows out, roof off, carpet and EVERYTHING out and it came down to almost 2000 lbs :oops: like expected, plus or minus 1000 lbs. :wink:

So at 3000lbs with driver (thats how it was weighed which also helps test the corner balance) my car was about 2840 without driver. So that means I can take another 80-90 lbs out without taking any more points :twisted: THANKS DOUG :!:


PS Not quite a 944 spec yet, but if you will let me run with you Tim, I would be willing to accept my big weight penalty :D
Jad Duncan
997 S Cab - Sold
996 "not a cup car" Sold
Tesla Model S
Porsche Taycan
https://www.goldfishconsulting.com/
User avatar
Jad
Pro Racer
 
Posts: 1788
Joined: Wed Jun 30, 2004 11:03 am
Location: Del Mar

Postby Tim Comeau on Tue Nov 22, 2005 9:58 am

Well..........ok. Have you ever seen those sleds they use during the tractor pulls on TV?
Tim
Comeau Racing Enterprises, Inc.
944 Spec racing specialist
New and used 944 parts source
http://www.comeauracing.com
PCA since 1985
Tim Comeau
Club Racer
 
Posts: 967
Joined: Fri Jul 16, 2004 10:49 am

Postby bibbetson on Tue Nov 22, 2005 11:25 am

Thats it. I'm bringing lead for all the KP drivers next year! Soon we will have karts and Cup cars with KP plastered on the side.

Bring it on! :lol:
billeye #491
'94 968
User avatar
bibbetson
Time Trialer
 
Posts: 204
Joined: Wed Jul 14, 2004 9:19 pm
Location: El Cajon

Next

Return to General Discussions

Who is online

Users browsing this forum: No registered users and 52 guests