Saw some of this on Pelican so I'll repost it here for the SDR racers.
Good price, thought someone here might need one.
See post below and the link to the Rennlist thread.
http://forums.rennlist.com/rennforums/s ... p?t=219283
From Rennlist.......
In light of the recent tragedy at the Watkins Glen DE, OG Racing will make HANS devices available to Rennlist members only at special discounted prices thru the end of August. All model 20 economy HANS are $795 and all model 30 economy HANS are $1050. All model 20 professional HANS are $1050 and all model 30 professional HANS are $1515.
Our intent is to get these crucial safety devices into the hands of people who need them, not just racers but DE participants and track event junkies. When coupled with properly installed 5, 6 or 7 point harnesses, a HANS device controls the driver’s neck and head in an impact to reduce the chances of a severe or fatal injury.
Due to the nature of the HANS device, we cannot sell them on-line. To see our HANS offerings, please goto www.ogracing.com. To order your HANS device, please call 1-800-934-9112. You must mention that you saw the offer on Rennlist to receive the discount and free ground shipping.
Bill Love
President, OG Racing
www.ogracing.com
This info may be helpful too...
http://hansdevice.com/s.nl/sc.5/category.30/.f
It's easy to find the right HANS® for you.
1. SEATBACK ANGLE For comfort the HANS® should match the angle of your seatback.
MODEL 10 - EXTREME UPRIGHT SEAT
If you sit very upright and cannot get comfortable with a Model 20 try this Model.
MODEL 20 - UPRIGHT SEAT
All sedans including NASCAR, Busch, Sprint, Midget, Quarter Midget, Drag, Modified, Bandalero and similar. All sportscars including Porsche, BMW, Corvette, Honda, Viper etc. Marine applications including UIM and Drag Boats.
MODEL 30 - SEMI RECLINED SEAT
Formula Mazda, Atlantic, Infiniti Pro, Barber Dodge, IRL, C/D Sports Racer, Formula 1 and similar.
MODEL 40 - RECLINED SEAT
The Model 40 is a rare application and fits extremely reclined seats such as Vintage FF.
Many people who buy a Model 40 return it for a Model 30. Please measure your seat (use an angle meter available at DIY-type stores) before ordering.
2. NECKSIZE
The width of the HANS® collar is sized to fit your neck or shirt collar size.
Under 12 Inches - Size Extra Small (XS) (For people under 100 lbs.)
12 to 15 Inches - Size Small (S)
15 to 18 Inches - Size Medium (M) (Called size REGULAR on older models)
Over 18 Inches - Size Large (L)
So a person with a 16" neck driving a Corvette would use a HANS® 20M.
It's as easy as that!
3. HELMET ANCHOR INSTALLATION
The HANS® attaches to your helmet via two metal anchors. 90% of our customers install their own anchors - all you need is a 1/4 inch drill and measuring tape. Devices come with instructions plus a special installation tool. If you prefer we will install the anchors for you as an extra cost option. Please select this service in Parts and Accessories to let us know you prefer this.
4. PROFESSIONAL and ECONOMY VERSIONS
Some models are available in lightweight (Professional) and regular (Economy) versions.
The only difference is weight - about 6 - 8 ounces depending on size. There is no performance difference between the versions.