'86 930 Intake Manifold removal HELP

Porsche Technical related discussions.

'86 930 Intake Manifold removal HELP

Postby helgeseg on Sat Sep 08, 2007 2:18 pm

Ok, the oil supply pipe to the turbo is leaking badly (the one that runs under the intake manifold next to the red engine cover). So I've taken off the CIS and boost valve housing (along with all the other air/vacume pipes, etc.). I've removed six nuts from the intake manifold but it won't come off. Five of the six injector valves will wiggle which seems to indicate the injector flanges are not siezed to the manifold. I've squirted WD-40 around the 6 manifold bolts.

Am I missing something?

Thanks,
ERik
helgeseg
Member
 
Posts: 20
Joined: Thu Jan 05, 2006 10:37 pm
Location: San Diego

Return to Technical

Who is online

Users browsing this forum: No registered users and 46 guests

cron