Metric Hose End fittings source?

Porsche Technical related discussions.

Metric Hose End fittings source?

Postby gocart on Sat Aug 29, 2009 7:20 pm

I'm getting ready to install a front bumper oil cooler on my '71 911. I already have the front "trombone" setup from an '83SC installed. I also have the new cooler and some stainless hose. I have AN fittings for the new cooler.
All I need are the 30mm metric hose end fittings to connect the stainless hose to the hard lines in the front wheel well.
BAT's catalog has some listed http://64.202.180.37/files/ahosend.pdf part number FS-3016.
Does any one know of a source on this coast, or better yet in SD?

Thanks,
Gordon
Gordon Carter
'71 911 #56
User avatar
gocart
Time Trialer
 
Posts: 218
Joined: Wed Sep 24, 2008 2:42 pm

Re: Metric Hose End fittings source?

Postby 4est on Sat Aug 29, 2009 7:33 pm

VW Paradise in San Marcos, ask for Paula...
User avatar
4est
Time Trialer
 
Posts: 225
Joined: Sun Jan 15, 2006 9:38 pm

Re: Metric Hose End fittings source?

Postby gocart on Sun Aug 30, 2009 7:58 am

I only see AN hose ends on their web site. I'll call them Monday.

Thanks,
Gordon

Is your car going to be ready for Coronado?
Gordon Carter
'71 911 #56
User avatar
gocart
Time Trialer
 
Posts: 218
Joined: Wed Sep 24, 2008 2:42 pm

Re: Metric Hose End fittings source?

Postby 4est on Sun Aug 30, 2009 8:52 pm

Barring the unforseen....
User avatar
4est
Time Trialer
 
Posts: 225
Joined: Sun Jan 15, 2006 9:38 pm

Re: Metric Hose End fittings source?

Postby ronaldtrotter on Sun Aug 30, 2009 9:17 pm

Try Freight Outlet on Convoy in Clairemont Mesa. Just around the corner from Black Forest. I believe that is the name.
'82" 911 SC Targa
'86' Buick Grand National
'85' 944 Spec
2015 VW Sport Wagon TDI
ronaldtrotter
Time Trialer
 
Posts: 448
Joined: Mon Jun 13, 2005 8:10 am
Location: Chula vista

Re: Metric Hose End fittings source?

Postby ttweed on Mon Aug 31, 2009 6:25 am

ronaldtrotter wrote:Try Freight Outlet on Convoy in Clairemont Mesa. Just around the corner from Black Forest. I believe that is the name.

Do you mean "Industrial Liquidators" Ron? They carry carry Earl's Performance Parts products and can probably get the metric fittings even if they don't stock them.

TT
Tom Tweed -- #908
SDR Tech Inspection Chair 2005-06
SDR Forum Admin 2010-present
Windblown Witness Assistant Editor 2012-present
Driving Porsches since 1964
User avatar
ttweed
Admin
 
Posts: 1840
Joined: Fri Jul 02, 2004 7:13 am
Location: La Jolla, CA

Re: Metric Hose End fittings source?

Postby gocart on Mon Aug 31, 2009 7:34 am

I went to Industrial Liquidators first. They only have AN and a few metric adapters. I'd like to do it right with the metric fittings if I can.

thanks,
Gordon
Gordon Carter
'71 911 #56
User avatar
gocart
Time Trialer
 
Posts: 218
Joined: Wed Sep 24, 2008 2:42 pm

Re: Metric Hose End fittings source?

Postby richard on Mon Aug 31, 2009 9:25 am

Try Pirtek at 7710 Arjons in San Diego (off Miramar). They have lots of metric stuff, will puut metric fittings on anything.
richard
Time Trialer
 
Posts: 212
Joined: Wed Aug 18, 2004 6:06 pm


Return to Technical

Who is online

Users browsing this forum: No registered users and 34 guests