Page 1 of 1

What is Wrong With This Picture

PostPosted: Tue Aug 30, 2011 11:02 am
by JERRY B
http://cgi.ebay.com/ebaymotors/Porsche- ... 2eb70ec455


Here is your chance to list all the problems this would cause 8)

Re: What is Wrong With This Picture

PostPosted: Tue Aug 30, 2011 10:25 pm
by harnishclan
First one is the hot air intake.

Re: What is Wrong With This Picture

PostPosted: Tue Aug 30, 2011 10:31 pm
by JivenJim
0930 Intake does not show the front gold rim by the cone front, and has no ram air portion. (like shown in picture)
The filter can be bought for less than 50$ and you can quick tie or L-Bracket it down for 100$ less.
The Intake is about 2.75” and not 3, so you would need a spacer gasket.
Don’t think that white plastic pvc Belt cover “adapter” is going to work.
The mount picture is straight Aluminum and not Powder coated, nor black.
Warrantee Says must be returned within 7 days of receiving. Shipping is about 4 days to NY! (Leaves you 3 days to start and see if you like/ ship back..)
There is no divider from hot air coming over radiator and cool air scoop in wheel well. Not a show stopper but usually makes it a filter and not a system.
Oh and it is not CA CARB Legal cause it does not have a EOD#/sticker. So better stick on the stock, before smog..
But all in all it does not appear to be any worse than most Ebay stuff.
What did I miss. I was never in to CSI.

Re: What is Wrong With This Picture

PostPosted: Tue Aug 30, 2011 11:12 pm
by CrashBrown
There's only 1 problem for you Mr. Bumpus . . . you cannot run that set-up in GSS!!!

:lol:

Re: What is Wrong With This Picture

PostPosted: Wed Aug 31, 2011 8:09 am
by JERRY B
All the air that comes in from the timming belt cover will be unfiltered :banghead: