1979 SC spare parts?

Porsche Technical related discussions.

1979 SC spare parts?

Postby tb911 on Sun Jul 22, 2012 11:49 am

What spare parts and/or special tools should one have in the trunk when taking an 1979 911SC on road trips?

such as: belts/relays/fuses/fuel pumps/Porsche special tool number 67, etc.

Anything?

Thanks
Tom Brown
SDR President
Z8 Rules Coordinator
etc.

1979 911 SC
1996 911 Turbo
2017 Macan S
tb911
Admin
 
Posts: 403
Joined: Thu Jul 01, 2004 7:25 am

Re: 1979 SC spare parts?

Postby Steve Grosekemper on Sun Jul 22, 2012 7:41 pm

Roadtrip!
Tom- 911SC's hardly ever break so you are good...
But if something were to happen I would want the following items:
Assortment of ceramic fuses (these old fuses can be hard to find).
A spare window switch. They are a weak spot and can blow the fuse for all the windows.
Locking a car with the windows down is far less effective.
Spare fan belt and the correct wrench and fan holder tool to replace it on the road.
Six inch piece of 10-14 gage wire with 1/2 inch of insulation stripped off each end.
That will help you start the car at the gas station when it wont crank from a heat soaked starter just like I did at the AX for you. You were paying attention and remember what I did-right? :wink:
Steve Grosekemper #97
http://www.911SG.com
https://www.facebook.com/911steveg/
https://www.instagram.com/steve911sg/
PCA-SDR Tech Advisor/Scrutineer/Forum-Admin
1997 993S & 986S street cars & 911SC track car.
User avatar
Steve Grosekemper
Admin
 
Posts: 1379
Joined: Thu Jul 01, 2004 6:15 pm
Location: San Diego

Re: 1979 SC spare parts?

Postby Jad on Mon Jul 23, 2012 9:25 am

Or just bring Steve.... :roflmao:
Jad Duncan
997 S Cab - Sold
996 "not a cup car" Sold
Tesla Model S
Porsche Taycan
https://www.goldfishconsulting.com/
User avatar
Jad
Pro Racer
 
Posts: 1788
Joined: Wed Jun 30, 2004 11:03 am
Location: Del Mar

Re: 1979 SC spare parts?

Postby tb911 on Mon Jul 23, 2012 5:45 pm

Steve Grosekemper wrote:Spare fan belt and the correct wrench and fan holder tool to replace it on the road.
Six inch piece of 10-14 gage wire with 1/2 inch of insulation stripped off each end.
That will help you start the car at the gas station when it wont crank from a heat soaked starter just like I did at the AX for you. You were paying attention and remember what I did-right? :wink:


Tell me more about the wrench and fan holder tool -- what do I need and where to get it

At the AX, I thought you bled the pressure out of the fuel line -- vapor lock in the accumulator -- said I needed "the big one"
Tom Brown
SDR President
Z8 Rules Coordinator
etc.

1979 911 SC
1996 911 Turbo
2017 Macan S
tb911
Admin
 
Posts: 403
Joined: Thu Jul 01, 2004 7:25 am

Re: 1979 SC spare parts?

Postby ChuckS on Mon Jul 23, 2012 10:20 pm

Actually Tom, there are only 4 things you need!

1 AAA Card
2 American Express Card
3 Piles of Cash
4 Cell phone

Have fun!!! :surr:
Chuck Sharp
1988 911 Carrera 3.2 Targa C.E.
1988 944 Turbo S
1986 944 Spec
and Several X Cars
User avatar
ChuckS
Time Trialer
 
Posts: 469
Joined: Tue Apr 03, 2007 4:03 pm
Location: Rancho Bernardo

Re: 1979 SC spare parts?

Postby tb911 on Tue Jul 24, 2012 10:22 pm

I've got all that

what I might be lacking is time.

As in, the week it takes for that special thing-a-ma-dohickie to be shipped from Stuttgart.
Tom Brown
SDR President
Z8 Rules Coordinator
etc.

1979 911 SC
1996 911 Turbo
2017 Macan S
tb911
Admin
 
Posts: 403
Joined: Thu Jul 01, 2004 7:25 am

Re: 1979 SC spare parts?

Postby pdy on Wed Jul 25, 2012 7:30 am

Tom:

We can look over what you already have on Thursday.

I have spare fuses, and I think an extra fan holder wrench.
Paul D. Young http://www.deadpetsracing.com/
PCA Nat'l Club Race Advocate
Now: '78 911SC, '79 911SC, '04 955-S, '06 997-S, '88 924-S, '16 92A
Past: '74 914, '78 911SC, '78 928, '80 924-S, '82 931, '86 930, '03 996-4S
User avatar
pdy
Time Trialer
 
Posts: 466
Joined: Thu Aug 05, 2004 2:32 pm
Location: 2nd Place - Usually

Re: 1979 SC spare parts?

Postby Steve Grosekemper on Wed Jul 25, 2012 8:04 am

tb911 wrote:
Steve Grosekemper wrote:Spare fan belt and the correct wrench and fan holder tool to replace it on the road.
Six inch piece of 10-14 gage wire with 1/2 inch of insulation stripped off each end.
That will help you start the car at the gas station when it wont crank from a heat soaked starter just like I did at the AX for you. You were paying attention and remember what I did-right? :wink:


Tell me more about the wrench and fan holder tool -- what do I need and where to get it

At the AX, I thought you bled the pressure out of the fuel line -- vapor lock in the accumulator -- said I needed "the big one"


Oh Ya.
You probably have a bad fuel accumulator. You need to replace your 20cc unit wth a 40cc unit.
You need to put fuel gauges on to make sure.
(could be a fuel pump check valve or something else. But the 20cc unit is just to small).
So you know how to get around that from what I showed you at the AX.

When it wont crank- (This is because the starter is binding internally from heat and the ignition
can't provide enough energy to activate the solinoid).
Do this:
(E-brake on and in nuetral)
Turn key to run position. (dash lights on)
Remove 14-pin engine connector at the relay board that lives in the left rear corner of the engine compartment.
Use that piece of wire to bridge connector 2 to connector 13. (they are marked on the plug and at opposite diagonal corners from each other).
This will provide dirct battery power to the starter and the car will start and run.
Now plug the 14-pin connector back in and you are ready to go!
WARNING!!!!!!
There is lots of stuff spinning around now and you could loose your fingers if you dont use extreme caution!

The fan and holder and wrench should be in your tool kit (Ha, Ha, Ha)
This is the fan holder tool. Because you have a double air injection pulley you will just want to use a socket for the fan nut
Image
Stop by the shop sometime and I can give you a 5-minute course on roadside repairs.
Steve Grosekemper #97
http://www.911SG.com
https://www.facebook.com/911steveg/
https://www.instagram.com/steve911sg/
PCA-SDR Tech Advisor/Scrutineer/Forum-Admin
1997 993S & 986S street cars & 911SC track car.
User avatar
Steve Grosekemper
Admin
 
Posts: 1379
Joined: Thu Jul 01, 2004 6:15 pm
Location: San Diego


Return to Technical

Who is online

Users browsing this forum: Google [Bot], Majestic-12 [Bot] and 24 guests