Gary Burch wrote: Great idea- Went out early Sunday morning.
+1, I look forward to enjoying some of them.
Free north of LA fun run.
http://www.targacalifornia.com/
John Simone the builder.
wide-body.
PCA SDR
Porsche Club of America - San Diego Region Discussion Forum
Mike's latest 911 project.
19 posts
• Page 2 of 2 • 1, 2
Re: Mike's latest 911 project.
by Mike on Tue Oct 21, 2008 5:46 pm
+1, I look forward to enjoying some of them.
Free north of LA fun run.
http://www.targacalifornia.com/
John Simone the builder.
wide-body.
Michael_Gagen 
"Without the ability to manipulate each wheel independently, Its a fun challenge to try and be your own,
ABS, traction control and stability control" Erik K.
"Without the ability to manipulate each wheel independently, Its a fun challenge to try and be your own,
ABS, traction control and stability control" Erik K.
-
Mike - Club Racer
- Posts: 891
- Joined: Wed Jun 30, 2004 9:45 am
- Location: La Mesa
Re: Mike's latest 911 project.
by Mike on Sat Nov 29, 2008 6:16 am
The RSR is doing well but the buzz at John’s garage today was the rumored late January PCA 3 day “double points” time trail at WSIR. SOW and Big Willow on the same weekend!
I'd like to have the 993 shape back in time for the SOW TT Friday/Saturday followed by the Big Willow TT Sunday.
Some shots of John Simone saving a very warped rear bumper.
Our 2nd bumper, the first was worse.
The part came from LA, it appears the bumper mold may have warped.
This photo shows John's effort to make it right.
The chunks of glass on the floor was extra material that John had to remove from the warped bumper.
The 15x14 fuchs with 345/45/15 Yoko AVS tires fit perfectly.
Rear tires, 18s compared to 15s.
The 15s are over an inch shorter, a better look for the vintage fender arches.
After a Cadillac I left old town with a few colorful serapes, RSR interior material.
I'd like to have the 993 shape back in time for the SOW TT Friday/Saturday followed by the Big Willow TT Sunday.
Some shots of John Simone saving a very warped rear bumper.
Our 2nd bumper, the first was worse.
The part came from LA, it appears the bumper mold may have warped.
This photo shows John's effort to make it right.
The chunks of glass on the floor was extra material that John had to remove from the warped bumper.
The 15x14 fuchs with 345/45/15 Yoko AVS tires fit perfectly.
Rear tires, 18s compared to 15s.
The 15s are over an inch shorter, a better look for the vintage fender arches.
After a Cadillac I left old town with a few colorful serapes, RSR interior material.
Michael_Gagen
"Without the ability to manipulate each wheel independently, Its a fun challenge to try and be your own,
ABS, traction control and stability control" Erik K.
"Without the ability to manipulate each wheel independently, Its a fun challenge to try and be your own,
ABS, traction control and stability control" Erik K.
-
Mike - Club Racer
- Posts: 891
- Joined: Wed Jun 30, 2004 9:45 am
- Location: La Mesa
Re: Mike's latest 911 project.
by Mike on Wed Dec 24, 2008 10:04 am
A little dust on the camera lens...
Jim Duncan was a big help with many jobs, here he is after hanging a C2 cooler and 10 inch fan in the wide front fender.
Jim next round of Jager is on me!
Here's one of me.
Ok phase 2, the car is at Mark Tyler's Qualtech auto collision center in Mission Valley for a little more body work and then paint.
Color tbd....
Jim Duncan was a big help with many jobs, here he is after hanging a C2 cooler and 10 inch fan in the wide front fender.
Jim next round of Jager is on me!
Here's one of me.
Ok phase 2, the car is at Mark Tyler's Qualtech auto collision center in Mission Valley for a little more body work and then paint.
Color tbd....
Last edited by Mike on Sat Apr 25, 2009 3:17 am, edited 1 time in total.
Michael_Gagen
"Without the ability to manipulate each wheel independently, Its a fun challenge to try and be your own,
ABS, traction control and stability control" Erik K.
"Without the ability to manipulate each wheel independently, Its a fun challenge to try and be your own,
ABS, traction control and stability control" Erik K.
-
Mike - Club Racer
- Posts: 891
- Joined: Wed Jun 30, 2004 9:45 am
- Location: La Mesa
Re: Mike's latest 911 project.
by Crustychief on Wed Dec 24, 2008 10:35 am
NIce to see that car coming together.
79 sc minerva blue
85 944 black (gone but not forgotten)
85 944 black (gone but not forgotten)
- Crustychief
- Member
- Posts: 17
- Joined: Thu Jul 24, 2008 4:39 pm
- Location: san diego
19 posts
• Page 2 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 35 guests