Page 1 of 1

12/11 Sat 8 AM Tech Session: Dyno Day at JBA HP/TQ test

PostPosted: Thu Nov 04, 2010 11:42 am
by MR LIPP
Image
..........................................Image Dec. 11th Saturday 8:00 AM Image
................................................................... Tech Session:
................................................................ Dyno Day at JBA


........................... Find out how much HP/Torque your baby really has.
........................... Sorry, the dyno can't do all wheel drive or four wheel drive vehicles
..................... Cost: $60.00 for 2 Dyno pulls payable in CASH at the event.

Click here to register

The order will be first registered, first served. We will figure out a schedule for ETA on your dyno runs.
Due to time limitations, there is a 20 car max at this event, however you are welcome to watch also :rockon:

Image
Coffee and donuts served


Questions? Contact pca.sdr.techsessions@gmail.com

Image
http://www.jbaracing.com/custom-dyno-tuning.asp

JBA's full service shop features a Dyno Dynamics load-bearing eddy-current chassis dyno. Results are weather-corrected and the dyno reliably handles everything from a 50-hp grocery getter to a 1,000 hp racecar! For every power verification, you receive a color graph that charts your hp and torque curves, along with a printout that includes mph, rpm, hp, torque, ambient temp, air/fuel ratio and vacuum/boost readings throughout the rpm band. For more information, please feel free to contact JBA at 858-495-3395.

JBA Performance Center
5675 Kearny Villa Rd
San Diego, CA 92123
Phone 858.495.3395




Click here for directions

Re: 12/11 Sat Tech Session: Dyno Day at JBA HP/TQ test

PostPosted: Wed Dec 01, 2010 7:55 pm
by MR LIPP
bump

Re: 12/11 Sat 8 AM Tech Session: Dyno Day at JBA HP/TQ test

PostPosted: Tue Dec 07, 2010 4:43 pm
by MR LIPP
........................... Sorry, the dyno can't do all wheel drive or four wheel drive vehicles