Looking for parts.

[Mmagus]

Hi gang,

We are gathering up parts for Tuffy's going over so I figured I would ask here before buying. Most of these are available from Pelican and fairly reasonable prices but I though that maybe some of you might have spares from a rebuild or the like laying around and want to part with it.

Thanks,
Mark

Here is the shopping list with the Pelican part#:

944 101 205 02 Oil pan gasket
Rod Bearing kit
928 105 199 12 Cam tower gasket
999 701 602 40 cam o-ring
999 113 349 40 cam seal
925 105 139 40 sleeve
944 105 321 00 onion skin seal x3
928 105 184 00 Sealing ring
928 105 189 02 cork gaskets
999 701 652 40 Balance shaft o-rings x2
928 105 139 02 sleeve
999 113 282 40 upper balance shaft seal
999 113 281 40 Lower balance shaft seal
999 113 331 40 front crank seal
944 107 161 02 toothed sleeve oil pump drive
999 707 283 40 o-ring
944 107 136 03 oil pump o-ring
999 701 613 40 AOS upper seal
999 701 661 40 AOS lower seal
999 707 040 40 oil cooler o-ring x2
944 107 153 02 rubber spacer
944 107 147 03 oil cooler gasket
944 110 163 05 intake gaskets x4
944 111 196 01 exhaust gaskets x4
944 111 135 01 exhaust gaskets x2
944 375 042 04 motor mount
flywheel bolts x9
pressure plate bolts x9

Oil Pan Baffle kit

[Steve Grosekemper]

Mark
Don't have any of this stuff but you don't need the cork gasket on the back of the cam housing. Just glue it with loctite 574. You also need to replace the 15 cam housing bolts.
Good luck.

[Mmagus]

Thanks for the heads up Steve!


Mark