Page 1 of 1

Tech Inspection form

PostPosted: Wed Dec 11, 2013 8:09 am
by surferr
I'm trying to print a Tech Inspection form from MotorsportsReg for the PCASDR Autocross - Qualcomm Stadium West Lot 4 January 2014 http://www.motorsportreg.com/index.cfm/ ... qh94_F3vIV

I am using the link provided http://pcasdr.net/pcasdr/forms/AXRegForm.pdf

and end up with :banghead:


The webpage cannot be found
Most likely causes:
•There might be a typing error in the address.
•If you clicked on a link, it may be out of date.
What you can try:
Retype the address.
Go back to the previous page.
Go to and look for the information you want.

anyone else having trouble or is my computer messed up?
thanks

Re: Tech Inspection form

PostPosted: Wed Dec 11, 2013 8:23 am
by gjb3545
I can not access the PCA-SDR website main page. I get an error message #404 access denied, no authorization etc.I can access the forum page through a Google search. Not even PCMATIC can fix it!

Re: Tech Inspection form

PostPosted: Wed Dec 11, 2013 9:07 am
by Robert
The SDR website's homepage is http://pcasdr.net and is working, at least for me, right now.

The direct link to the tech form is located at http://pcasdr.net/2013/wp-content/uploads/2013/11/AXRegForm.pdf.

The easiest way though to print a tech form though is to enter your car into the Zone 8 classification system at http://zone8.pca.org/CarClass/Default.aspx. That system can then print out a custom form for you with your classification information pre-filled in. Much easier.

The Forms & Documents page on the SDR website, which is where you can find the link to the tech form and all other important documents, did have a problem, but it's at least been temporarily fixed now and can be reached by going to the homepage, then selecting Resources, Forms & Documents. Or you may directly access it by going to http://pcasdr.net/?page_id=662.

Re: Tech Inspection form

PostPosted: Thu Dec 12, 2013 10:09 am
by surferr
Thanks Robert, good to go with your links.



Robert wrote:The SDR website's homepage is http://pcasdr.net and is working, at least for me, right now.

The direct link to the tech form is located at http://pcasdr.net/2013/wp-content/uploads/2013/11/AXRegForm.pdf.

The easiest way though to print a tech form though is to enter your car into the Zone 8 classification system at http://zone8.pca.org/CarClass/Default.aspx. That system can then print out a custom form for you with your classification information pre-filled in. Much easier.

The Forms & Documents page on the SDR website, which is where you can find the link to the tech form and all other important documents, did have a problem, but it's at least been temporarily fixed now and can be reached by going to the homepage, then selecting Resources, Forms & Documents. Or you may directly access it by going to http://pcasdr.net/?page_id=662.