https://grassrootsmotorsports.com/artic ... ots-motor/
Greg
PCA SDR
Porsche Club of America - San Diego Region Discussion Forum
Low buck tech tips from GRM
2 posts
• Page 1 of 1
Low buck tech tips from GRM
by Greg Phillips on Sun Dec 05, 2021 10:23 pm
Greg Phillips
SDR Past-President @ 2014 Instructor of the Year
1982 911SC coupe, 2002 Boxster S (the track cars)
1989 928S4 & 1992 968 M030 (the black cars)
2019 Hertz Z06 Corvette & 2005 Boxster (Pat's car)
SDR Past-President @ 2014 Instructor of the Year
1982 911SC coupe, 2002 Boxster S (the track cars)
1989 928S4 & 1992 968 M030 (the black cars)
2019 Hertz Z06 Corvette & 2005 Boxster (Pat's car)
-
Greg Phillips - Pro Racer
- Posts: 1559
- Joined: Wed Jun 30, 2004 11:41 am
- Location: Coronado
Re: Low buck tech tips from GRM
by kleggo on Wed May 11, 2022 11:55 am
good info
i use blue tape instead of paper to hold nuts / bolts into sockets
O rings over flex sockets is always a good tip
as is washing your hands after using fabbing CFRP or FRP prior (using the bathroom).
i use blue tape instead of paper to hold nuts / bolts into sockets
O rings over flex sockets is always a good tip
as is washing your hands after using fabbing CFRP or FRP prior (using the bathroom).
Craig Fenstermaker
i'm here in Vista
i'm here in Vista
-
kleggo - Time Trialer
- Posts: 400
- Joined: Wed Jul 25, 2007 4:43 pm
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 11 guests